Draw the corridor to the gate
- Before starting the outbreak, open Civilians in the build bar and select Corridor.
- Start at a crowd you want to move. Drag toward a reachable gate and release with the corridor endpoint at the entrance. In the current patch, civilians follow streets around buildings toward the endpoint and can go through a gate there.
- Check the placement cost in the interface and leave enough budget for the gate and defenses.
- After pressing Ready, follow the crowd. Look for people crossing the entrance and a change in Civilians Safe. If the crowd reaches the endpoint without entering, check the last stretch of the route before spending more on its width.
Use Hold to gather a spread-out group
Place a Hold over the area you want to gather. Hold draws nearby civilians from its outer area into the inner area. Start the corridor inside that inner area so people have a route onward. Use Hold when a useful group is spread across nearby streets. A route that already passes through a concentrated crowd may be enough by itself.
Choose a corridor, Security Bus, or Medivac
| What you see | What to try | What to watch |
|---|---|---|
| A crowd can walk to a gate | Draw a corridor to the gate. Add a Hold first if the group is spread out. | Look for people to cross the entrance and the Civilians Safe count to change. |
| A reachable street passes close to a crowd | Consider a Security Bus. Civilians close to a bus with free seats approach it, and panicked civilians can run to board. | Check whether the bus reaches the group and still has room before relying on it for this pickup. |
| A broken crossing separates civilians from your walking route | Consider a Medivac if it is available. It drops riders at the nearest safe zone and can return for more. | Watch a full trip before assuming everyone has boarded. Once a pickup spot is empty, it looks for another large group outside. |
In v0.43.1, Leave Now was removed. A Medivac lifts off once full or after a short pause in boarding. If it is waiting with passengers on board, give it time to depart on its own.
Diagnose a stopped crowd
| Symptom | Check |
|---|---|
| Nobody joins the line | Start where civilians actually are. Use Hold to collect a scattered group. |
| People reach the end and mill outside | Line up the endpoint with a gate. Check whether a building or wall separates the endpoint from it. |
| People peel off when the infected arrive | Civilians avoid danger. Try a safer approach or a closer gate in your next layout. |
| The price disagrees with an old screenshot | v0.43.1 uses a $30 starting fee plus covered area. At default width, the developer gives about $60 for 300 m and $135 for 1 km. Check the current price when changing width. |
For the enclosure itself, see safe zones and gates. The patch summary explains why launch-day corridor tutorials quote a different price.
Sources & verification
- Jogamedev’s official Steam listing 2026-11-18
- Update #1, v0.43.1 2026-11-19
- Launch build input walkthrough, for control placement 2026-11-18
- Jogamedev’s Steam news feed, Update #1 2026-11-19